Connecting To The Audio Device - Toshiba SB1 Manual Del Usuario

1) Drill two 7mm diameter holes and must
be horizontal. (the wall-mounting kit does
not contain the level meter)
2) Secure the wall plugs in the holes
3) Fix the bracket by screws
(Sample Illustration) 3D sound bar SB1 placed wall-mounted

Connecting to the audio device

Follow these instructions to route external audio signals from devices such
as a TV to the sound bar via the OPTICAL, COAXIAL, L/R AUX IN and
LINE IN jacks.
Using the AUX IN jacks
1. Connect a 3.5mm - RCA audio cable (provided with the sound bar) from
the L/R AUX IN jacks on the sound bar to the AUDIO OUT jacks on a
TV, DVD or other audio device.
(Sample Illustration) Analog audio cable connection
You can connect to the TV by using one of the cables below:
NOTE
3.5mm - RCA audio cable (provided with the sound bar)
■
RCA - RCA cable (not provided)
■
2 Press the INPUT button on the sound bar or the remote control to
switch to the AUX IN input.
User's Manual
4) Fix the sound bar on bracket
3.5mm to RCA audio coble (supplied)
3D SOUND BAR SB1
EN-11