Denver SC-17 Manual Del Usuario página 4

ENGLISH
Main Menu – Zoom IN/OUT
The parent unit has available a 2X Digital Zoom. To use this option follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select ZOOM IN option then press OK button. The picture on the LCD
panel will be zoomed and the option in the main menu will change to "ZOOM OUT" in order to
restore the original view.
4.Press to exit from main menu.
To restore the original view:
1.Press OK button to enter in the main menu.
2.Press or buttons to select ZOOM OUT option then press OK button. The picture on the
LCD panel will be restored at the original size.
3.Press to exit from main menu.
If you enable the ZOOM IN option and turn OFF the parent unit, when you will
power ON the parent unit again the original view will be restored.
NOTE
Main Menu – Baby Unit Volume
This option allows you to set the volume level of the baby unit (camera). To set the volume
level of the baby unit (camera) follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select BABY UNIT VOLUME option then press OK button.
4.Press or buttons to select the level of volume (from 0 to 9) then press OK button to
confirm the selection.
5.Press button to exit from main menu.
We suggest to perform some test in order to set the correct volume level in the
baby unit depending on the camera distance from the child.
NOTE
Main Menu – Effect Set
This option allows you to modify parameters and viewing the images on the parent unit LCD
panel. The parameters available are:
1.VERTICAL: This parameter allows you to flip the image vertically. Possible values are ON
(image flipped) or OFF (original image).
2.HORIZONTAL: This parameter allows you to flip the image horizontally. Possible values are
ON (image flipped) or OFF (original image).
3.CONTRAST: This parameter allows you to adjust the contrast level (0 - 8).
4.SATURATION: This parameter allows you to adjust the color saturation level (0 - 6).
Effect Set – VERTICAL and HORIZONTAL
If necessary, for example if the camera has been installed on the ceiling and then the images
taken are flipped, you can flip the image of the parent unit LCD panel. To do this follow these
steps:
ENG 4
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or to select EFFECT SET option then press OK button.
4.Press or to select VERTICAL parameter if you want to flip the image vertically or select
HORIZONTAL if you want to flip the image Horizontally then press
value on ON and press OK button to confirm the selection.
To restore the original view follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or to select EFFECT SET option then press OK button.
4.Press or to select VERTICAL parameter or HORIZONTAL parameter then press button
to change the value on OFF and press OK button to confirm the selection.
The VERTICAL and HORIZONTAL parameters stay stored in the parent unit
then when you turn OFF the appliance and power ON it again, the parent unit
maintains the same settings.
NOTE
Effect Set – CONTRAST
To set the LCD panel contrast level follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select EFFECT SET option then press OK button.
4.Press or buttons to select CONTRAST parameter then press or buttons to set the
desired level (from 0 to 8).
5.Press OK button to confirm the selection then press button to exit from main menu.
Effect Set – SATURATION
To set the LCD panel saturation level follow these steps:
1.Power ON the parent unit.
2.Press OK button to enter in the main menu.
3.Press or buttons to select EFFECT SET option then press OK button.
4.Press or buttons to select SATURATION parameter then press or to set the desired
level (from 0 to 6).
5.Press OK button to confirm the selection then press button to exit from main menu.
SATURATION= 0 means grayscale image.
SATURATION= 6 means strong color image.
NOTE
Main Menu – SETUP
Here below you will find setup parameters list:
1.VOX ON/OFF: Allows you to enable (ON) or disable (OFF) VOX function.
2.VOX SENSE: Allows you to select high sensitivity (HI) or low sensitivity (LOW) concerning
VOX function.
3.TV MODE: Allows you to set the TV mode PAL or NTSC.
4.LCD BRIGHT: Allows you to set the LCD panel brightness level (0 – 4).
ENGLISH
button to change the
ENG 5