Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9. FIXTURE LINKING
•
You will need a serial data link to run light
shows of one or more fixtures using a DMX-512
controller or to run synchronized shows on two
or more fix- tures set to a master/slave operat-
ing mode. The combined number of channels
required by all the fixtures on a serial data link
determines the number of fixtures the data link
can support.
•
Fixtures on a serial data link must be daisy-
chained in one single line. To comply with the
10. DATA CABLING
To link fixtures together you must obtain data
cables. You can purchase DAP Audio certified DMX
cables directly from a dealer/distributor or con-
struct your own cable. If you choose to create your
own cable please use data-grade cables that can
carry a high quality signal and are less prone to
electromagnetic interference.
DAP Audio Certified DMX Data Cables
•
DAP Audio cable for allround use. bal. XLR/M
3 p. > XLR/F 3 p. Ordercode FL01150 (1,5m.),
FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115
(15m.), FL0120 (20m.).
•
DAP Audio cable for the demanding user with
exceptional audio-qualities and connector
made by Neutrik®. Ordercode FL71150 (1,5m.),
FL713 (3m.), FL716 (6m.), FL7110 (10m.).
EIA-485 standard no more than 30 devices
should be connected on one data link. Con-
necting more than 30 fixtures on one serial data
link without the use of a DMX optically isolated
splitter may result in deterioration of the digital
DMX signal.
•
Maximum recommended DMX data link dis-
tance: 100 meters. Maximum recommended
number of stratus fazers on a DMX data link: 30
fixtures.
P. 13
| Tecshow Stratus Fazer
English version
Tabla de contenido
