POWER OUTPUT - ELECTRIC HOTPLATES
Setting
0
OFF
1
VERY LOW
Warming dishes & melting butter and chocolate
2
LOW
Simmering, sauces, stews, milk puddings, poached eggs
3
MODERATE
Vegetables, frozen foods, boiling water
4
MEDIUM
Fresh Vegetables, pasta, fish, pancakes.
5
HIGH
Omelettes, steaks
6
VERY HIGH
Chops
A neon indicator light adjacent to the control knob will glow when the electric plate is
in use.
Only pans which have smooth flat bases should be used on the electric hotplates. The
size of the pan should be as close as possible to the diameter of the hotplate, and ne-
ver smaller (see Fig. 9). The base of the pan should be dry and spillages should be
avoided. Empty pans should not be left on the plates, nor should the plates left switched
on without a pan.
YES
NO
Maintenance and cleaning
Before cleaning the Hob, ensure the appliance has cooled down. Remove the plug from
the socket or (if connected directly) switch off the electricity supply.
When cleaning the enamelled, varnished or chrome sections, use warm soapy water
or a non caustic detergent. For stainless steel use an appropriate cleaning solution.
Hotplates should only be cleaned with a cotton cloth coated with vaseline or seed oil.
Never use abrasives, corrosive detergents, bleaching agents or acids. Avoid any acid
or alkaline substances (lemon, juice, vinegar etc.) on the enamelled, varnisched or stain-
less steel sections.
The burners can be cleaned with soapy water. To restore their original shine, use a
household stainless steel cleaner. After cleaning, dry the burners and replace.
It is important the Burners are replaced correctly.
NO
NO
NO
Fig. 9
41
Aftercare
Before calling out a Service Engineer please check the following:
— that the plug is correctly inserted and fused;
— that the gas supply is not faulty.
If the fault cannot be identified:
switch off the appliance — do not tamper with it — call the Aftercare Service Centre.
The appliance is supplied with a guarantee certificate that ensures that it will be re-
paired free of charge at the Service Centre.
Chromed grids and burners
Chromed grids and burners have the tendency to dark with the use.
This is a normal and inevitable phenomenon, but it doesn't jeopardize absolutely the
functionality of the hob.
In anycase from our after sales service centre the spare parts are available.
Cover
The cover is available as optional accessory.
Before closing the cover, to protect it from excessive temperature changes, always
wait until the burners or plates have completely cooled down.
Any spillages should be removed from the cover before opening it.
The Manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors con-
tained in this brochure. We reserve the right to carry out modifications to products as required, including
the interests of consumption, without prejiudice to the characteristics relating to safety or function.
42