INSTALLATION DIAGRAM

Operating Modes:
Mode 1: Sensor Mode.
- At dusk, it automatically turns to 10% brightness.
- Turns on to 100% brightness when motion is detected in the range of <5 meters.
- In 30 seconds if no motion is detected the light switches to 10% brightness.
- Turns off at the dawn.
Mode 2: Constant Brightness Mode.
- The sensor will be disabled.
- Automatically turns on at the dusk with 100% brightness and works constantly till the battery
capacity goes to Zero. (Upto 4 hours).
EN
SOLAR LIGHT
I. Ground installation instructions:
1. After confirming the installation position, fix the
grounding support with screws. As shown in
Figure 1.
2. Install the lamp onto the bracket and tighten
the
screw with a six-legged wrench. As shown in
Figure 2 & 3.
II. Surface mounted installation instructions:
1. Choose the appropriate installation position and
fix the installation bracket with screws. Picture 1.
2. Install the lamp on the mounting bracket and
tighten the screw by hand with a six-legged
wrench.
Switch Function:
- Press and hold the button for 2-3 seconds to
switch ON the solar light. Once switched ON it will
indicate a blue light.
- When switching on the solar light by default it
will be in Mode 1.
- To enter Mode 2, press the button again.
- Pressing the button for the third time the solar
light will switch OFF and the blue light will
disappear.
loading