Set Date/Time - TTM BIG300 Professional Manual Del Usuario

2.1 SET DATE/TIME:

When LCD displays
display: 1-DATE 2-CL.
1. Press "1" directly to set the date, LCD will display, " d 2009 01-01", "09 01-01 " is twin-
king, input numbers of year, month and date directly. Press DEL to back to submenu.
2. Press "2" directly set the time, LCD will display
is twinkling, input numbers of hour and minute directly.
3. Press "FLASH/SET" to confirm, and then press
LCD display illustration:
2.2 SET RINGER/RINGER VOLUME ADJUSTABLE:
When LCD displays
Then LCD will display
, press "1" to enter calendar setting, then LCD
,
to exit.
press "2" to enter ringer/ringer volume setting.
1. Press "1" to select normal ringer melody, LCD displays
"UP" or "DOWN" to set the desired melody.
2. Press "2" to select VIP ringer melody, LCD displays
"UP" or "DOWN" to set the desired melody.
3. Press "3" to adjust the 4 level ringer volumes. LCD displays
choose your desired volume by using "UP"/ "DOWN" buttons. (1 is the lowest and 4 is the
highest, the default is 4)
4. During each step, press "FLASH/SET" to confirm, and then press
2.3 SET THE ALARM CLOCK:
When LCD displays
will display ,
sets alarm time can be setted. The first alarm time is one-time alarm, the second and the
third alarm time is daily alarm.
1 Press "1" to enter the first alarm time setting, LCD shows
is twinkling. Directly input the alarm time.
2 Press "2" to enter the second alarm time setting. LCD shows
is twinkling, directly input the alarm time.
3 Press "3" to enter the third alarm time setting. LCD shows
is twinkling, directly input the alarm time.
During each step, press "FLASH/SET" to confirm and
Remark: The first alarm time is only available for one time.
The second and third alarm time can work all the time if this unit is not out of power.
During the alarm clock rings, press any key to end its ringing.
2.4 SET DO-NOT- Disturb
This function allows the unit not ring during the do not disturb time, except the VIP calling.
When LCD displays
Then LCD will display
Remark: the first means hour and the second
During each step, press "FLASH/SET" to confirm and
and press
and press
to exit.
Press "3" to enter alarm clock setting. Then LCD
is twinkling. indicates there are 3
to exit.
Press "4" to enter do-not-disturb time setting.
, is twinkling , input time directly.
means minutes.
to exit.
to
,
,
,