Pur Line Zafir H1500 Manual De Instrucciones página 9

3. Then screw the wall support bracket onto the two holes on the bottom rear of the unit. This operation must
be performed so that once the radiator is installed, the portion of the plate with a single hole is leaning against
the wall.
4. Hang the heater on the stands.
5. Once hung on the wall mark the free hole of the wall support bracket on the bottom of the heater.
6. Remove the appliance from the wall, make a hole at the mark and enter the corresponding wad.
7. Finally hang the appliance on the brackets and screw the mounting plate to the wall.
ASSEMBLY WITH FOOT SUPPORT*
*Available separately
1. Before assembly the foot support, please disassemble the 2 hooks on the bottom of the unit:
2. Place the foot support at the bottom of the heater and screw onto the holes on the bottom and the bottom
rear of the unit.
7