Contro Panel And Key Functions - turbionaire Smart 16 eco Manual De Instrucciones

EN

CONTRO PANEL AND KEY FUNCTIONS

POWER
MODE
TIMER
UP/
DOWN
WIND
In standby state press the Power button to start, and during operation
of the dehumidifier press the Power button to shut down. For initial
startup the default is low wind, the display show the environment
temperature and the default set humidity is RH50%. If the dehumidifier
is not energized for the first time, after startup the state is kept the
same as that before shutdown. The LED is closed, only power light is
illuminated when standby.
In boot state or regular boot, press this button to chose autumatic
dehumidification or continuous dehumidification (dry function), each
function have 2 second confinnation delay time.
In boot state, press this button, the LED light and blink. In blink time,
press up/down button to set the time of timing. press up/down
buttom to add/reduce one hour . Keep pressing the up/down button
to add/reduce time as well. The maximum is 24 hour, the minimum is
1 hour. LED blink 5 time to confinn the timing set. Press the timer button
again to reset the timing time in timing status.
Press up/down button( each press for 5%RH to select humidity
from 30-80%RH only in automatic dehumidification.
Press this button to choose fan speed, high-low-high, only valid in
automatic dehumidification. Keep pressing fan speed button for 5s
to start inside dry.