Idiomas disponibles
Idiomas disponibles
UK
JACOB JENSEN
Hygrometer (registered design)
TM
Congratulations with your new JACOB JENSEN
This hygrometer is developed and constructed in Denmark and designed by the world
famous designer Jacob Jensen, whose products are recognized for optimal function,
exquisite and beautiful design . Jacob Jensen has received more than 100 prizes from
around the world, and has several products on display at the Museum of Modern Art
in New York .
The JACOB JENSEN
Hygrometer measures the relative humidity and has a memory
TM
function for storing the highest (MAX) and lowest (MIN) humidity reading (since
last reset) and a memory reset button, as well as a processor reset button .
The display shows the relative humidity expressed in percents and indicates if the
indoor environment is DRY/COMFORT/WET .
The hygrometer can stand free or it can be mounted directly on the wall or with
help from a mounting plate . You can also choose to mount it on a JACOB JENSEN
Weatherstation Stand . Mountings can be made with the product alone or together
with one or more products from the JACOB JENSEN
14
Hygrometer .
TM
Weatherstation range .
TM
Mounting and replacing battery
The hygrometer requires 1 "AAA" battery (Included - mounted in the battery-
compartment) .
1 . Open the battery-cover on the back of the hygrometer .
2 . Mount the battery as indicated by the polarity symbols (+/-) marked inside the
battery compartment .
3 . Replace the battery-cover .
Notice
1 . When you install or replace the battery, it takes about 3 - 4 seconds to update
the humidity data .
2 . When the display starts to go dimm it is time to replace the battery .
The Memory Function
The hygrometer will automatically store the highest and the lowest humidity
measured since the last reset and you can recall those readings as follows:
Maximum humidity: Push the MAX button once and the display will show you the
highest humidity measured since last reset . To go back to current humidity: Push the
TM
MAX button again and the display will show the current humidity .
Minimum humidity: Push the MIN button once and the display will show the lowest
humidity measured since last reset . To go back to current humidity: Push the MIN
button again . The display will show the current humidity .
