Idiomas disponibles
Idiomas disponibles
Pairing procedure
Step 1:
Switch on the device and wait a few seconds
until "FREEDOM" appears on the display, it is
now automatically in pairing mode.
Step 2:
SEARCH for a Bluetooth device according to
the phone's user manual.
Step 3 :
Once SEARCH is fi nished, select "Cruiser III"
from the list.
Step 4:
Enter generic pass code"1234" to associate
(Pair").
Step 5:
Once you have entered the pass code, your
phone is the standard device for this car kit.
This car kit's LCD display shows "PAIRED".
Then, LCD shows Hans-free Profi le or
Headset profi le. Also, LCD display shows the
name of the paired phone. Pairing has been
completed successfully.
How to disconnect
Method 1 : Press L button once.
Method 2 : Switch off this car kit
Method 3 : Switch off your phone
Method 4 : Move the phone 10 meters away from this
car kit
How to re-connect
Method 1 : Press L button once.
Method 2 : From phone's Bluetooth menu.
Answer incoming calls
Method 1 : Press (9) button.
Method 2 : Press phone Answer call button.
Reject and hang up a call
• Press (8) button to reject or hang up.
• Or Press phone hang up button to end the call.
Volume up and down
• Press + to increase volume
• Press - to decrease volume
Mute Mic during conversation
• Press L to mute the mic. The display show "Mute On".
The mic is off.
• Press L again, the mic is on, display shows "Mute
off". The mic is automatically switched on once call
has been completed.
6
00092130bda.indd Abs2:6-Abs2:7
00092130bda.indd Abs2:6-Abs2:7
Call waiting
In conversation with 1st call, a new 2nd calls come in.
• Press (9) to activate 2nd call, keep 1st call waiting
• Press (9) again to re-activate 1st call and hold 2nd call
waiting
• Press (8) hang up 1st call and reactivate 2nd call
• Press (8) again to hang up 2nd call.
Call transfer
• Press C once to transfer the calls from car kit to
phone.
• Press C once more to transfer calls from phone to car
kit.
• For Nokia phones, press L to transfer calls from phone
to car kit.
Voice dialing
Press and hold C 2 seconds until you hear a tone that
indicates it is ready for speech recognition. Say the
desired name. The phone replays the desired name and
dials the related phone number.
Note: This voice dialing function is available for phones
supporting voice dialing.
CC
Making a call from 10-Received calls memory OR from
10 last Missed calls
• Press and hold (9) 2 seconds, display shows
"Call Rec. Received "
• Press + or – to select the telephone number you dial.
Press (9) to make an outgoing call.
Display Set up Menu
• Press and hold L for 2 seconds to enter setup menu.
• + Or – : forward/backward
• Press (9) confi rm selection
• Press (8) exit
Display setup fl owchat
Registration and Safety Certifi cation/
General Information
This device bears the CE symbol as specifi ed by the
provisions of Directive R & TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device
is in compliance with the basic requirements and other
relevant guidelines and regulations of the 1999/5/EC
guideline. You will fi nd the declaration of conformity in
the Internet at http://www.hama.com
7
14.01.2008 11:27:47 Uhr
14.01.2008 11:27:47 Uhr
