WARNING
The appliance is fitted with a device to stop it from operating if the lid (R) is not correctly locked into
place and the bowl (S) or alternatively, the blender (C), is not correctly inserted.
INSTRUCTIONS FOR USE
WARNING: Make sure that the appliance is unplugged and that the control dial (A) is set to "0" before
cleaning it or fitting or removing attachments.
- Place the bowl (S) on the power base (B) and lock it into place by turning it anticlockwise so that
the tab on the bottom part of the handle clicks into the slot in the power base (Fig. 2).
- Fit the blade support (F) onto the central shaft in the bowl (S) (Fig. 3).
Chopping, mixing or whisking
- To use the appliance as a chopper, fit the metal blade (G) onto the blade support (F), while for
mixing, fit the plastic blade (H) by making sure that the slots inside the base of the blade are in
line with the notches in the support and pressing the blade downwards (Fig. 4).
WARNING: The blades are sharp; handle them with care.
- To use the appliance to whisk egg whites or whip cream, fit the special attachment (M) onto the
blade support (F), as illustrated in Fig. 5.
WARNING: Before starting the appliance, make sure that the bowl (S) and the disc (L) are perfectly
clean and without any traces of butter or egg yolk.
- Cut the foods into small pieces (1.5 x 1.5 cm) and place them inside the bowl (S) or for mixing,
insert the ingredients.
WARNING: Never add foods over the maximum level marked on the bowl (S).
- Fit the lid (R) over the bowl (S) so that the tabs inside the bowl fit into the relevant notches in the
lid; lock the lid by turning it anticlockwise until it clicks into place (Fig. 6).
WARNING: Make sure that the lid is firmly locked into place before starting the appliance.
- Plug the appliance into the mains power.
- Start the appliance, selecting the rotation speed of the blade using the operating dial (A).
The appliance has two operating speeds: minimum «1» and maximum «2».
WARNING: When using the appliance for mixing or whisking, the recommended operating speed
is "2".
It is also possible to select the pulse function by turning the dial (A) anticlockwise to the setting
«P». For the best use of this function, only turn the dial for a very short time (2-3 sec.).
WARNING: Never operate the appliance for more than 30 seconds at a time. Wait at least 2 minutes
before operating it again.
- For smoother, finer chopped foods, remove the food, if necessary, from the sides of the bowl with
a spatula, pushing it towards the centre.
WARNING: Never remove foods from the sides of the bowl while the appliance is operating. Switch
off the appliance first and unplug it from the mains power.
WARNING: To prevent accidents or damage to the appliance, always keep hands and cooking
utensils well away from moving blades or discs.
WARNING: Never use fingers to remove foods from the sides of the bowl while the appliance is
operating. Always use the spatula provided.
- 9 -
EN