Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
PLEASE NOTE:
the threaded rods must be aligned such that
they are diametrically opposed.
Bolt the other flanged end of the HAWLE-VA-
3.
RIO with the counter flange (or fitting, valve).
TENSION LOCK ASSEMBLY
1.
Take the threaded rods out of the pa-
ckaging and screw off the outer nuts
and rounded washers on both sides.
2.
Insert the threaded rod at the shorter side (inside angle) of the
HAWLE-VARIO, and screw on the two outer rounded washers and
nuts loosely.
PLEASE
NOTE:
direction of the tension rod assembly. The dished
side of all rounded washers must point inward.
3.
Insert the other threaded rods as described
above and screw on the rounded washers and nuts loosely.
The two marked lugs of
Observe
the
installation
9
Tabla de contenido
