Functional Description - Sytech SY-DC02 Manual Del Usuario

DESCRIPTION
1) Lid
2) Water tank
3) MAX water marking
4) MIN water marking
5) Water Spout
6) Filter
7) Separator (Optional)
8) Ceramic cups
9) Switch
10) Cup mat
11) Power cord

FUNCTIONAL DESCRIPTION

o
The product has three brewing modes:
1) General mode for two cups.
2) Adjustable strength mode for two cups.
3) Fast brewing mode for one cup.
o General mode for Coffee or Tea: Add the necessary amount of ground coffee or Tea in each compartment. Fill up the water
container with the required quantity of water, close the lid and place the mugs into position. Lastly, turn on the switch for the unit to
start functioning.
o
Adjustable strength mode for coffee or tea: Insert the separator into the filter, and add the desired amount of ground coffee or tea in
each compartment. Fill up the water container with the required quantity of water, close the lid and place the mugs into position.
Lastly, turn on the switch for the unit to start functioning.
o
Fast brewing mode for coffee or tea: Take out the separator and add the necessary amount of ground coffee or tea, and fill up the
water container with no more than one cup of water (MIN water marking). Close the lid and place the mugs into position. Lastly, turn on
the switch for the unit to start functioning.
o
Turn off the unit after the machine has stopped dripping. Wait for 1 minute and then take out the filter basket to clean.
o
Temperature Control device: When the appliance is turned on without water OR once the water has finished in the container during
brewing process, the temperature will increase and the temperature control device will cut off the power automatically preventing the
unit from burning.
o
Thermo fuse device: This unit is equipped with a secondary temperature protection. In case the temperature control device fails, the
thermo fuse device will cut off the power. At this point unplug the appliance at once.
All manuals and user guides at all-guides.com