VOLTOMAT HEATING CH-107914.3 Manual De Instrucciones página 62

CH-107914.3
PARTS DESCRIPTION
1. Indicator light
2. Power & thermostat control switch
3. Handle (on both sides)
4. Feet
5. Turbo switch
ASSEMBLY
Take the appliance out of the packaging and remove the protective bag.

Push the two plastic feet onto the bottom of the unit. Fix them into the slot firmly.

Place the appliance at your desired location. Keep all objects at least 1 meter from the front and sides

of the unit.
NOTE: this appliance cannot be mounted on the wall.
OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when they are turned on after a longer period of
storage, it is normal that the heaters may emit some smell and fumes. This will disappear when the heater
has been on a short while.
Insert the plug to the power supply.

Turn on the power & thermostat control switch to choose the setting: I = 750W, II = 1250W, III

= 2000W.
This appliance will keep working after the switch is rotated to the setting "I", "II", or "III".

If you rotate the power & thermostat control switch over the setting "III", the thermostat will be

switched on. The appliance will automatically maintain the set temperature.
To turn off the unit, rotate the power & thermostat control switch back to "0".

After use, unplug it from socket.

NOTE: this appliance is equipped with a turbo function. You can turn it on by pressing the turbo switch on
the side of the appliance to reinforce the air convection.
Caution: The heater will remain hot for some time after it is turned off. Handle with care.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance automatically in case of
overheat, e.g. due to the total or partial obstruction of the grids. In this case, unplug the appliance, wait
about 30 minutes for it to cool and remove the object which is obstructing the grids. Then switch it back on
- 61 -
GB