Unloading The Machine; Cleaning; Varying Initial Mixture Doses; Transport And Handling - Domino SPI 60 Manual De Instrucciones

the first timer ( ), also set the second (
to the required operating time and press 1st
speed start pushbutton ( ).
At the end of operation time at 1st speed,
the machine starts operating automatically at
2nd speed.
If you wish to operate only at 2nd speed,
make sure that timer 1 (
set timer "2" ( ) to required time.
Finally press start pushbutton (
end of the preset time, the machine stops
automatically. If you wish to rotate the bowl
in an opposite direction to normal, set selec-
tor switch ( ) to position "REV".
To start the bowl press pushbutton (
which operates only manually and therefore
only for the time it is kept pressed. You will
find this manual bowl rotation control useful
at the end of the process when you want to
detach the dough from the spiral.
Do so by setting selector switch (
"REV" and pressing pushbutton (
operation also shifts the dough to the remo-
val area.

3.2 UNLOADING THE MACHINE

At the end of the time period set for the pro-
cess the machine will stop automatically.
Raise the bowl guard, remove the dough,
and thoroughly clean all parts affected by the
process immediately after (see chapter 6
CLEANING on page 21).
At the end of the operation, close the guard.

3.3 VARYING INITIAL MIXTURE DOSES

If you need to vary the initial mixture doses
by adding or changing the percentage of the
ingredients, use the food slots without stop-
ping the machine or raising the guard.

4. TRANSPORT AND HANDLING

Machine packing also encloses an instruc-
)
) is set to "0", and
). At the
),
) to
). This
20
tions handbook and statement of conformity
to EC directive.
When unloading the machine from the tran-
sport vehicle, lift using suitable equipment.
Unless you need to check its contents, you
are recommended not to open the packing
until the moment of installation.
The machine is shipped packed in a closed
crate, secured by wooden.

5. INSTALLATION, CONNECTIONS

AND SET-UP
Install and use the machine in a room
that can be efficiently ventilated, and
where the floor is level, compact and
easy to clean.