How To Replace The Turntable Stylus (Needle); Care And Maintenance - SOUNDMASTER VCS3 Manual De Instrucciones

HOW TO REPLACE THE TURNTABLE STYLUS (NEEDLE)

Removing old stylus
1. Hold a screwdriver at the tip of the stylus and push down in the
direction of "A".
2. Remove the stylus by pulling it forward and down.
Installing a new stylus
1. Hold the tip of the stylus and insert the other edge by pressing in the
direction of "B".
2. Push up in the direction of "C" until it locks at the tip.
Please read these instructions in order to achieve the best results for your vinyl and to prevent
accidental damage due to incorrect use of the cleaning kit contents.
Regular cleaning of vinyl records prevents build-up of dust, keeps them in the best condition
and allows them to sound as good as possible.
Carbon Fibre Brush
This eliminates static charges while removing fine dust particles.

Whilst the vinyl record is in place on the player and rotating, hold the metal handle of
the brush and place it on the record.

Move the brush slowly from the centre of the record to the outside edge, repeating the
action if necessary.

Move the black handle across the brush to clean off dust and debris and then click it
into place over the brushes for storage.
Stylus Cleaning Brush
Designed to clean your stylus and hard to reach places, the small brush is great for reaching
the stylus tip.

Simply place the brush on the back of the stylus and brush forward.

Repeat this action until the stylus is clean.

CARE AND MAINTENANCE

3
VCS3 / English Instruction Manual