Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
CD-Coin Holder or Cupholder
THIS SHEET PERTAINS TO INSTALLATION OF
CD-COIN HOLDER OR CUPHOLDER UNIT IN BIN
(A).
NOTE: FORWARD BIN DOES NOT NEED TO BE
REMOVED FROM CONSOLE TO INSTALL CD-
COIN HOLDER/CUPHOLDER UNIT.
BIN (A) WITH CUPHOLDER INSTALLED:
BIN (A)
CD-COIN HOLDER UNIT
FLEXING SNAP
FEATURES (X4) AND
LEAD-IN POCKETS
CD-Coin Holder or Cupholder
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
23JN06
I
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
SNAP FEATURES AND
LEAD-IN RIBS FOR CD-
COIN HOLDER OR
CUPHOLDER UNIT
INSTALL (X4)
CUPHOLDER
UNIT
REVISION
AUTH
1. Position unit as shown, lining up lead-in pockets with
mating ribs.
2. Apply force to snap unit into position. Unit will lock tightly
into place.
* SNAP FEATURES ARE COMMON TO BOTH CUPHOLDER
AND CD-COIN HOLDER UNIT. CAN INSTALL INTERCHANGE-
ABLY USING FORWARD OR REAR LOCATION.
REMOVAL: NEED TO REMOVE UNIT IN REAR SLOT POSI-
TION BEFORE REMOVING UNIT IN FORWARD POSITION.
PART NO.
IR 23JN06
INSTALLATION INSTRUCTIONS
DR
TITLE
CD-Coin Holder or Cupholder
PART NO.
19158347
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19158347
SHEET
1
SHEET
1
9
OF
9
OF
Manuales relacionados para GM 19158347
Resumen de contenidos para GM 19158347
- Página 1 ABLY USING FORWARD OR REAR LOCATION. FEATURES (X4) AND LEAD-IN POCKETS REMOVAL: NEED TO REMOVE UNIT IN REAR SLOT POSI- TION BEFORE REMOVING UNIT IN FORWARD POSITION. PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
- Página 2 REMOVAL: PULL UP ON CD-UNIT AND/OR APPLY UPWARDS PRESSURE FROM UNDERNEATH UNIT TO DISENGAGE SNAPS. FLEXING SNAP FEATURES (X4) AND LEAD-IN POCKETS PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN DATE...
- Página 3 ABLY USING FORWARD OR REAR LOCATION. FLEXING SNAP FEATURES (X4) AND REMOVAL: NEED TO REMOVE UNIT IN REAR SLOT POSI- LEAD-IN POCKETS TION BEFORE REMOVING UNIT IN FORWARD POSITION. PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN DATE...
- Página 4 DÉPOSE : LE DISPOSITIF INSTALLÉ EN POSITION DES D’ENCLIQUÈTEMENT RAINURES ARRIÈRE DOIT ÊTRE RETIRÉ AVANT DE SOUPLES (X4) ET CREUX DÉPOSER LE DISPOSITIF INSTALLÉ À LA POSITION AVANT. DE POSITIONNEMENT PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN DATE...
- Página 5 DÉPOSE : TIRER LE DISPOSITIF DE CD VERS LE HAUT ET (OU) EXERCER UNE PRESSION ASCENDANTE DEPUIS LE DESSOUS FIXTURES D’ENCLIQUÈTEMENT SOUPLES DU DISPOSITIF POUR LE DÉSENCLENCHER. (X4) ET CREUX DE POSITIONNEMENT PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
- Página 6 DÉPOSE : LE DISPOSITIF INSTALLÉ EN POSITION DES D’ENCLIQUÈTEMENT RAINURES ARRIÈRE DOIT ÊTRE RETIRÉ AVANT DE SOUPLES (X4) ET CREUX DÉPOSER LE DISPOSITIF INSTALLÉ À LA POSITION AVANT. DE POSITIONNEMENT PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN DATE...
- Página 7 DESINSTALACIÓN: TIENE QUE DESINSTALAR LA UNIDAD FLEXIBLES (X4) Y EN LA POSICIÓN DE LA RANURA TRASERA ANTES DE CAVIDADES DE GUÍA QUITAR LA UNIDAD DELANTERA. PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
- Página 8 DESINSTALACIÓN: JALE LA UNIDAD DE CD O APLIQUE PRESIÓN HACIA ARRIBA DE L UNIDAD DE DEBAJO PARA CARACTERÍSTICAS DE FIJACIÓN DESENGANCHAR LOS TRABADORES. FLEXIBLES (X4) Y CAVIDADES DE GUÍA PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...
- Página 9 DESINSTALACIÓN: TIENE QUE DESINSTALAR LA UNIDAD FIJACIÓN FLEXIBLES (X4) EN LA POSICIÓN DE LA RANURA TRASERA ANTES DE Y CAVIDADES DE GUÍA QUITAR LA UNIDAD DELANTERA. PART NO. 19158347 CD-Coin Holder or Cupholder IR 23JN06 SHEET INSTALLATION INSTRUCTIONS ALL INFORMATION WITHIN...