Idiomas disponibles
Idiomas disponibles
25. Remove the hood latch striker (1) and mounting
screws (2) from the vehicle hood (3).Save the hood
latch striker (1) and mounting screws (2) for
reinstallation.
26. With the aid of an assistant, remove the two bolts (1)
from the vehicle hood hinge (3). Repeat steps on op
posite side. Remove and discard the vehicle hood
(2).Save the hood hinge bolts for reinstallation.
27. With the aid of an assistant, support and position the
hood (2) included in the kit to the two upper hinge
brackets (3) on the vehicle.
28. Install and hand tighten the hinge bolts (1). Repeat
steps on opposite side.
29. Adjust the kit hood to the correct position, refer to the
hood flushness chart. Once the hood is positioned
properly, tighten the hood hinge bolts (1) to 28 N∙m
(21 ft. lbs.). Repeat steps on opposite side.
Jan 21, 2011
www.mopar.com
7
K6869570 Rev 2
