Change User Code; Change Admin Code - eTIGER ES-K1A Manual Del Usuario

Change user code

The user code may be required to interact with the control panel (arm or disarm the
system, or switch to Home Mode). We recommend you to change the user code before
using the keypad for the first time.
1. Enter Setup mode.
2. Type [38+new user
3. You hear one beep: the setup is successful.
Remark
The user code must consist of 4 digits. Default user code is "1234" .

Change admin code

The admin code may be required to change the settings and interact with the control
panel (arm or disarm the system or switch to Home Mode). We recommend you to
change the admin code before using the keypad for the first time.
1. Enter Setup mode.
2. Type [39+new user
3. You hear one beep: the setup is successful.
Remark
The admin code must consist of 6 digits. Default admin code is "123456".
code+#].
code+#].
EN
19