Replacing The Light Bulb - ROMMER F 101 A+ Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

− Warning-Do not use electrical appliances inside the food storage of the appliance unless
they are of the type recommended by the manufacturer.
− If the appliance can not be used any more, please release the refrigerant before abandon
at a place exposed to the air and away from tinderbox.
GENERAL INSTRUCTIONS FOR CARE AND MAINTENANCE
The refrigerator should be cleaned every other month, before cleaning; the electric plug must
be removed from the power supply.
Wipe the inside and outside of the refrigerator with a wet soft cloth.
If it's too dirty, clean with a soft cloth soaked with neutral detergent and clean water, remove
the moisture with dry cloth.
If you are going away on holiday or for any other reason, wish to leave the refrigerator idle for
any period of time, proceed as follows:
− Disconnect the refrigerator from the electric power supply by removing the plug from the
wall socket.
− Remove all food.
− Clean and dry the inside as instructed in the direction given above for cleaning.
− Leave the doors open to prevent any unpleasant smells from building up while the
refrigerator is not used.
CLEANING:
− When cleaning the refrigerator the electric plug must be removed from the power supply.
− Use water and a non-abrasive detergent.
− Clean with a soft cloth soaked in this solution and remove moisture with a dry cloth.
− Remember to clear the defrost drain situated at the back just above the glass cover.

REPLACING THE LIGHT BULB

Should the light fail, switch off at the socket outlet and pull out the mains plug. Then ensure
the bulb is screwed securely in the bulb holder. Replace the plug and switch on. If the light still
fails, obtain a replacement E14 screw-cap type 10 Walt (Max) bulb from your local electrical
sore and then fit it. Carefully dispose of the burnt-out light bulb immediately.
-11
-

Hide quick links:

Tabla de contenido
loading

Tabla de contenido