Premier ED-5514MM Manual De Instrucciones página 12

Rated voltage: 110V~ Rated power:15W
Rated frequency: 60Hz Power factor:0.5
Tube type:56V/7W Effective area:60M²
USE METHOD
1.Use at electricity 110V~ 60Hz, plug it directly.
2.Hold the Power switch on the side of the revolving rotation door, turn it to the "Power ON" position,
when you hear "click" voice machine is turn on. Make sure the rotation door and the air inlet cancels
under superposition when machine is operating.
3.For choose Light Sensor function, raise the sensor cover on the top of machine and fix it in the near
holder, make the cover point to the mark of AUTO, the light sensor function is auto turn on. When the
lights of environment is dark (such like at dusk), the machine will auto turn on; on the contrary, when the
lights of environment getting bright (such like in day), the machine will auto turn out.
4.When you plug in the power and turn on the machine, the machine will default turn on the light sensor
function. For turn off the light sensor function, please make the sensor cover completely covering the
sensor on top. Otherwise, the machine will auto turn on/turn off depend on the lights of environment. It's
suggested turn off light senor function when machine used at the environment with many mosquitoes
and insects.
5.Put the machine on the ground in the room up 0.8m to 1.2m, to avoid interference with other light
sources.
6.For cleaning the residual body, Please hold the switch on the revolving rotation door and turn it to the
POWER OFF position. After you hear the voice of "click", the machine is turn off, and then shut off the
power.
7.Take the machine lightly and holding the mosquito storage box, turn to the direction with open mark
(ref picture 3), when hear "click" then take off the box for storing residual of mosquitoes.
8.Throw the residual of mosquitoes away and cleaning it with brush, avoid the sundries block the box for
residual of mosquitoes. Regular Cleaning is necessary in order to achieve the best function.
9.Align the slot of clean box with the slot of the machine, turn it around by the lock mark side (like in
picture3), and hear the "click" voice it will be well closed.
P-3