Installing The Battery - Steren COM-562 Manual Del Usuario

INSTALLING THE BATTERY

Your new Pocket Presenter Wireless Laser it's powered by a 3V
battery (CR2032).
Make sure to install one new battery before to start to use the
device.
Remove the battery compartment cover and insert a new battery,
paying attention to polarity.
Then, replace the cover.
If you see that the operating range is becoming weak, you must
replace the battery.
INSTALLING THE DEVICE IN WINDOWS XP
Make sure to install a battery before to start to use it.
1.- Remove the receiver from the compartment.
2.- Plug the receiver into an available USB port in the computer.
3.- The computer will detects the new hardware and
automatically will update the system. After this process, you can
start to use the presenter.
If you use Windows 98 you must have to use its Installation
CD in order to fi nish the process.
HOW TO USE THE PRESENTER
Use the presenter with your Power Point presentations.
1.- Open a Power Point presentation.
2.- Run it in full screen.
3.- Use Up and Down buttons to forward or backward the slides.
4.- If you want to mark one specifi c point in the screen, press
the Pointer button, and the laser beam will be displayed in the
screen.
5.- Press ESC to leave the presentation mode.
ENGLISH-5