VOLTOMAT HEATING CAH-110093.2 Manual De Instrucciones página 16

CAH-110093.2
PARTS DESCRIPTION
1. Grille
2. Carbon fiber element
3. Heat/Oscillation switch
4. Handle
5. Base
Heat/Oscillation Switch:
"0" position – OFF
"1" position – low heat output (450W)
"2" position – high heat output (900W)
" " position – oscillation with high heat output
(900W)
OPERATION
1. Place the heater on a firm level surface free from obstructions and at least 3 feet away from any wall or
combustible materials.
2. With the heat/oscillation switch in the "0" position, plug the heater into the power outlet.
3. Rotate the switch to choose the suitable setting --- low heat output / high heat output / oscillation with
high heat output.
4. When you have finished using the appliance, turn the heat/oscillation switch to the "0" position and
unplug the appliance.
Note: In oscillation mode, the heater can only work on the high heat output (900W).
Rotation to horizontal position
The appliance can be used in a horizontal position. Just hold the handle with one hand, grasp the top of the
appliance and rotate it 90° clockwise with another hand. (See the arrow direction on the above picture.)
Caution! Make sure the appliance is cool to touch before you try to rotate it.
SAFETY SYSTEM
This heater is equipped with a tip-over switch under the base. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
CLEANING AND MAINTENANCE
The heater only needs regular cleaning on the outside.

Before you clean the unit, turn the switch off. Remove the plug form the socket and wait until the

heater cools down completely.
Use a damp cloth to wipe the heater housing.

Do not use detergents, abrasive cleaning liquids or chemicals (alcohol, gasoline etc.) to clean the

appliance.
TECHNICAL DATA
Operating voltage: 220-230V ~ 50/60Hz
Power consumption: 800-900W
- 15 -
GB