Associated Standards And Regulations - LBX instruments Orb-B Manual Del Usuario

8. Associated Standards and Regulations

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
9. Specifications
Construction in accordance with the following safety standards:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Construction in accordance with the following EMC standards:
EN 61326-1
Items
Voltage [VAC]
Frequency [Hz]
Motor rating input[ W]
Motor rating output [W]
Shaking motion
Orbital diameter[mm]
Max. load capacity
[Kg]
Motor type
Speed range[rpm]
Dimensions[W× H× D mm]
Operation type
Time setting range
Weight[kg]
Permissible ambient
temperature[℃]
Permissible relative
humidity
Protection class acc.
DIN EN60529
Specifications
100-240
50/60
16
10
Orbital
20
3
DC motor
0-200
330 × 270 × 105
Continuous/timed
1min – 19h59 min
3,1
5 – 40
80%
IP21
Table 7
7