Hardware Installation; Driver Installation - Conceptronic C56U Manual De Usuario

Before you can use your USB modem, you need to install the drivers.
The drivers can be installed when the USB modem is connected to your computer.
3.1

Hardware installation


Turn on your computer.

Connect the RJ11 phone cable to the USB modem and to a free phone wall outlet.

Connect the USB connector of the USB modem to a free USB port on your computer.
Your computer will automatically recognize the modem and show the „Hardware Installation Wizard‟.
You can ignore this wizard, or close the wizard by clicking "Cancel".
3.2

Driver installation


Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be shown
automatically. Click on "Run Autorun.exe" to start the autorun menu.
Note: If the AutoPlay option is not shown, you can start the autorun menu by browsing to
"Computer" and double clicking on your optical drive.

Select the option "Install Drivers" from the menu.

Select your operating system from the list with available operating systems.

The driver setup wizard will now be started. Click "OK" to install the drivers for your computer.

When the driver installation is finished, click "OK" to close the driver setup wizard.
The drivers for the USB modem are now installed.
3. Installation
ENGLISH
11