Remote Sensor (Rthr328N) - Front View; Remote Sensor (Rthr328N) - Back View; Remote Sensor (Rthr328N) - Lcd Display; Getting Started - Oregon Scientific Jumbo Manual Del Usuario

REMOTE SENSOR (RTHR328N) - FRONT VIEW

1
2
3
1. LCD display
2. LED status indicator
3. Ventilation duct

REMOTE SENSOR (RTHR328N) - BACK VIEW

1
2
3
4
5
6
7
8
1. Wall mount
2. CHANNEL switch (1-5)
3. RESET
4. °C / °F
5. SEARCH
6. EU / UK radio signal format switch
7. Battery compartment
8. Fold-out stand

REMOTE SENSOR (RTHR328N) - LCD DISPLAY

1. Reception
2. Channel number (1-5)
3. Low battery indicator
4. Time
5. Temperature - °C or °F
6. Temperature reading

GETTING STARTED

BATTERIES

Batteries are supplied with this product:
• Main unit
• Remote sensor
Insert batteries before first use, matching the polarity
as shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
To install the main unit batteries:
NOTE Do not use rechargeable batteries.
shows when batteries are low.
UNIT
Main
Remote Sensor
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.

REMOTE SENSOR (RTHR328N)

This product is shipped with the RTHR328N Remote
Sensor. The main unit can collect data from up to 5
sensors.
The THGR328N and THR228N sensors are also
compatible with this weather station. (Additional sensors
are sold separately. Contact your local stockist for more
information.)
The RTHR328N sensor collects temperature readings
and signals from official time-keeping organizations for
the radio-controlled clock.

SENSOR SET UP

1. Open the battery compartment with a small Phillips
screwdriver and insert the batteries matching the
polarity (+ and -) as shown below.
3
4 x UM-3 (AA) 1.5V
2 x UM-3 (AA) 1.5V
LOCATION
Clock/Alarm/Calendar Area
Outdoor Temperature Area