Disposal And Recycling - Ribitech PRS400 Manual De Instrucciones

• Place a wrench on the flange nut, hold the pin and undo
the flange nut by turning it anti-clockwise (Fig. 11).
• Remove the flange nut, external flange and grinding wheel
(l). Clean the flange and fit the new grinding wheel using
the above instructions in reverse and secure it.
L. ADJUSTING THE TILT ANGLE
Check the tilt angle of the motor (e) before using the equipment for
the first time and at regular angles thereafter. To do this, place a stop
angle between the base plate (a) and the motor holder (f) and
check whether the pointers on the scales (o) display 0° (Fig. 11). If this
is not the case, undo the retaining nuts on the pointers and adjust
them.
ORDERING REPLACEMENT PARTS
Please quote the following data when ordering replacement parts:
• Type of machine
• Article number of the machine
• Identification number of the machine
• Replacement part number of the part required
L. DISPOSAL AND RECYCLING
The unit is supplied in packaging to prevent its being damaged in
transit. This packaging is raw material and can therefore be reused or
can be returned to the raw material system.
The unit and its accessories are made of various types of material,
such as metal and plastic. Defective components must be disposed
of as special waste. Ask your dealer or your local council.
8
GB