Functions And Settings - Magnusson 3663602850793 Manual De Instrucciones

CAUTION!
• ALWAYS turn off the instrument before replacing the batteries.
• ALWAYS remove the batteries if the instrument is not to be used for
extended periods.
• ALWAYS use high quality batteries of the same brand, type and age.
• If the instrument does not work properly, or the low battery icon is displayed,
replace the batteries immediately.
• DO NOT expose the batteries or instrument to extreme temperatures or direct
heat source, as this can cause the batteries to leak.
• If the batteries should leak, remove them using a cloth and dispose of them
according to local regulations. Clean any leaked battery acid avoiding any contact
with skin, eyes & mouth.
• If any contact does occur, rinse affected areas immediately with fresh water and
seek medical advice.

Functions and settings

01 Laser line operation
1. Switch on laser "LINE" using switch 1.
2. Hold level against wall,using multi-function base.
3. Ensure it is level using horizontal (4) or vertical (5) spirit bubbles as required.
SAAM10586 Line and Point laser level A5 V6R.indd 6
4
5
Fig 1
6
03/12/2020 15:33