Using Your Vacuum In Upright Mode - Shark NZ801EUT Instrucciones

USING YOUR VACUUM
IN UPRIGHT MODE
WHAT DOES THE
BRUSH-ROLL INDICATOR
LIGHT MEAN?
Solid Green
The brush-rolls are on and
working as they should.
Solid Red
There is a jam in the
brush-roll and/or soft
roller area. Turn your
vacuum off and remove
any blockages.
Flashing Red*
The motorised floor nozzle
is overheating. Turn your
vacuum off and wait for it
to cool down.
No Light
The brush-rolls are off
because the vacuum is off.
* See Troubleshooting section for
further instructions.
1
Plug power cord into socket. Place foot on floor
nozzle and tilt handle back.
9
s h a r kc l e a n . e u
STEP 1 STEP 2
Suction
Control
MAX MIN
2 The soft roller spins in both settings
to pick up extra dust and debris.
Choose the appropriate setting:
Hard Floor
The brush-rolls spin slowly to pick
up fine dust and large debris on hard
floors.
Carpet
The brush-rolls spin faster to pick up
debris on and below the surface of
your carpets.
STEP 3
3 Press power button to turn vacuum
on to start cleaning. Please note the
brush-rolls will not spin unless the
wand is reclined.
s h a r kc l e a n . e u
10