Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Inflation accessory:
adapter storage compartment (6) on the backside of the device.
To use the inflation accessory open the air hose connector (7) and
plug in the adapter, then close the air hose connector.
adapter should be tight and secure. Plug the inflation accessory into
the object to be inflated (tire, football raft, etc.) and turn on air
compressor switch.
compressor off.
ATTENTION: Do not "over inflate" objects as objects may rupture
and/or explode causing serious injury and/or property damage.
Hook: Pull the hook (1) out and rotate to hang the work light at
desired location. Before storing, return the hook to original position.
Danger:
Always operate this air compressor in an open/ well
ventilated area, not inside a closed area such as a closed garage.
Warnings
Do not overload the device (max. current 12A)
Do not use the device in hazardous locations or areas
immerse cord, plug or product in water or other liquid. Do not use the
device in areas of accumulated water and never in rain (protection
class IP30
Keep the device ALWAYS away from flammable areas and/or
liquids.
Do not operate appliance with a damaged cord or plug or
after the appliance malfunctions or has been damaged in any way.
The device can get hot. If the device gets too hot during use, lay it
down for a while and let it cool down. Only put the device back in the
car when it has cooled down completely.
If the plastic glass which protects the working light is damaged, do
not longer use it.
The inflation needles are located in the
When the object is firm, switch the air
not waterproof).
Do not direct the light into people eyes.
The
Do not
Tabla de contenido
