Mr. Christmas Silhouette Snowglobe Guia De Inicio Rapido

I. DESCRIPTION
Thank you for purchasing the Silhouette Snowglobe. Automatic blowing snow and LED lights are presence activated.
This product is not a toy and is not intended for use by children.
II. OPERATION
1. Gently lift the unit from the packaging.
DO NOT LIFT BY HOLDING ANY ATTACHED FIGURES
OR PARTS.
2. Place the unit on any flat surface.
3. Remove the battery compartment cover located at the bottom of
the unit. (See Fig.I) Insert 4 x "AA" batteries (not included) into
the battery compartment making sure to align "+" and "-" as marked
inside the compartment. The unit can also be powered by adaptor.
(Not included) Plug the adapter into a nearby working outlet.
PLEASE NOTE: IF YOU WANT TO OPERATE WITH
AN ADAPTOR, DO NOT USE THE ADAPTOR AND BATTERIES
AT THE SAME TIME. TAKE OUT THE BATTERIES BEFORE
PLUGGING IN THE ADAPTOR. WHEN SWITCHING BACK TO
THE BATTERIES, UNPLUG THE ADAPTOR BEFORE
INSERTING THE BATTERIES.
4. Turn the VOLUME dial at the back of the unit from OFF
to MAX. Lights will go on, snow will begin to fall and music
will begin to play. (See Fig.II)
6. Turn the VOLUME dial to adjust the music. NOTE: When the
volume is at the minimum setting, no music will be heard.
7. A motion sensor is located at the front of the unit. The unit will
start playing everytime the motion sensor is activated.
III. TROUBLESHOOTING
Problem
No music, snow falling and
lights
Music is too loud, too soft or
not audible
www.mrchristmas.com
THIS PRODUCT IS NOT A TOY
Silhouette Snowglobe
Likely Cause
No power
VOLUME dial is
incorrectly adjusted
DC Jack
Solution
Make sure to insert new 4 x "AA" batteries into the battery compartment
making sure to align "+" and "-" as marked inside the compartment.
Turn the volume dail from "OFF" to Maximum.
Approach the sensor on the front of the unit and play should commence
Adjust VOLUME dial to your preference
1
Fig.I
Volume Control
Fig.II