Presentation - Simu SYSTEME AUTOSUN Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
GB
AUTOSUN SYSTEM -
S.A.S. au capital de 5 000 000 - Z.I. Les Giranaux - BP71 - 70103 Arc-Les-Gray CEDEX - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090

Presentation

1
1
3
Consign concerning the autonomy of the system
3
This system was developped to run into the following countries: France, Germany, England, Belgium, Netherlands, Czech Republic, Poland, Ireland, Spain, Portugal,
Italy, Greece, Luxembourg, Denmark, Austria, Switzerland, Hungary, USA (excluding Alaska), Turkey, Lebanon and Australia. For others countries, please contact us.
Reminder : Solar panel installation
4
- Ensure that the cables are not damaged during installation. Smooth the edges of all
the drilled holes.
- Do not put anything on the solar panel that would filter the sun's ray (e.g.: paint...).
- Keep the photovoltaic cells clean by cleaning them with clean water, using a soft cloth
to avoid scratching them (once a month).
4.1 - Fastening the solar Panel by riveting
Drilling measurements (mm) for panels placed to the left of the box:
449
28
Ø16
2008546 - 2008547 - 2008548
2
4
10,5
30
The Autosun system is a complete solar powered motor system for
roller shutters in walls and roofs. It comprises:
1- 12V T3.5 DC EHz Motor, 3, 6 or 10 Nm.
2- 12V solar panel
3- NiMh 12V 2.2Ah battery pack.
As options :
4- Emergency power supply ref: 9014738. Allows rapid recharging of the battery for
the Autosun system.
Compatible transmitters
2
1 : COLOR+ Wall Hz transmitter
2 : COLOR+ 1/5 channels Hz transmitter
3 : Color Multi 16 / Timer Easy / Timer Multi
transmitters
Transmitters range :
- 1, 2 and 3 : 20 m through 2 concrete walls .
- Do not position the transmitter near metal in order to avoid range losses.
Location of the "PROG" key on Hz
transmitters:
• The weight of roller shutter must comply with the charts determined for the motors.
Maximum shutter heights are: 1600 mm for 3Nm motors, 2400 mm for 6Nm motors
and 2700 mm for 10Nm motors.
• These consign are based on average annual data and for a roller shutter used for 2
cycles/day (1 cycle = 1 up and 1 down movement). Attention 1 cycle maximum for the
10 Nm motor in case of north orientation (or South orientation for Australia only).
In exceptional years, use the backup power supply to recharge the Autosun's battery.
• The solar panel should always be placed on the shutter housing so as to be as exposed
as possible to the sun's rays.
ORIENTATION EAST / WEST / SOUTH
+ Australia (orientation E/W/N)
3 Nm
6 Nm
10 Nm
- In winter, do not allow snow to build up on the panels.
- Caution! The cables and connectors must be protected from the roller shutter
movement.
Drilling measurements (mm) for panel placed to the right of the box:
5055194B
Read carefully these instruc-
tions before any use.
1
2
ORIENTATION NORTH
+ Australia (orientation S)
2 cycles/day
449
10,5
30
3
1 cycle/day max.
28
Ø16
1 /4
Tabla de contenido
loading

Este manual también es adecuado para:

200854620085472008548

Tabla de contenido