Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
FUNCTION BUTTONS
1. BATIDO / SMOOTHIE
The blade turns at high speed, suitable for smooth blending.
2. HIELO / ICE
The blade turns at high speed; it operates for 1 second and shuts off for 0.5 seconds,
perfect for crushing ice.
3. TURBO
The unit operates only when the pulse button is pressed and it shuts off once the
button is released. The blade turns at high speed.
. MIN
The blade turns at low speed.
5. MAX
The blade turns at high speed.
6. ON
The unit is switched on and the "BATIDO / SMOOTHIE", "HIELO / ICE" and "TURBO"
functions can be used.
7. OFF
The unit is switched off.
SPEED SETTINGS
Low:
for low-power use with liquids.
High:
for a more solid consistency- for blending liquids and solid foods.
Turbo:
to soften ice-cream; short, powerful pulse movements.
(The selector switch does not remain in the "Turbo" position when released.
To use this setting you must hold the selector switch in this "Turbo" position
or turn it repeatedly to this setting.
Caution: Maximum capacity of the glass jug is 1.5L).
USEFUL TIPS
-
For the best results when blending solid ingredients, place small portions in the
glass jug a little at a time instead of putting a large quantity all at once.
-
If you are blending solid ingredients, cut them first into small portions (2-3cm).
-
When blending solid ingredients, start by adding a small quantity of liquid.
Gradually add further quantities of liquid through the lid opening.
-
Always hold the blender top steady with your hand while the appliance is
operating.
-
Proceed carefully when blending think liquids.
-
To blend solid ingredients or very thick liquids we recommend you use the "Turbo"
setting to prevent the blades from sticking.
-
To crush ice easily it is advisable to add a small quantity of water.
CAUTION:
If the glass jug is filled too much the blades may not spin freely thus preventing
the blending cycles from operating correctly. If this happens, switch off the unit and
unplug from the socket. Empty some of the contents and then switch on again.
1
CLEANING AND STORAGE
Warning: Switch off the unit before cleaning to prevent electric shocks and other
hazards.
1. In addition to this, you should read the "Safety precautions" section at the beginning
of these instructions.
2. Do not clean the motor base, the power cord or the plug with water.
3. Clean the motor base with a soft, damp cloth and wash with a mild detergent.
. Half-fill the jug with hot water and a small amount of washing liquid. Leave the unit
to operate at maximum speed until the jug is clean (maximum 1 minute).
5. The jug base can be separated from the jug itself. Unscrew in a counter-clockwise
direction and remove the blade assembly together with the rubber seal.
6. Clean the grinder by half-filling the jug with hot water and a little washing liquid; fix
the grinder on to the top of the motor base. Leave the unit to operate at maximum
speed until clean. Then use the water to clean all grinder components. (maximum
1 minute).
7. Dry all components well before using again.
Caution: The blades are very sharp. Handle with care when cleaning.
8. Never use abrasive detergents.
Thank you for choosing one of our products.
15
Tabla de contenido
