Fellowes Metal E-200r Manual De Instrucciones página 6

ENGLISH
Punch / bind button
Inserting roller
Adjustable edge
guide
Punching pedal
Back margin adjustment
CAPABILITIES
Punching Capacity
80gsm
Transparent covers
100-200 micron
Up to 700 micron
Other standard covers
160-250g
Up to 300g
Up to 800g
Binding Capacity
Max binding coil size
Max document (80g) approx. 450 sheets
IMPORTANT SAFETY INSTRUCTIONS
Please read before use and keep for future
reference.
When punching;
- always ensure the machine is on a stable surface
- test punch scrap sheets and set the machine before punching final
documents
- remove staples and other metal articles prior to punching
- never exceed the machines quoted performance
Keep the machine away from heat and water sources.
Never attempt to open or otherwise repair the machine.
Plug the machine into an easily accessible socket.
Turn off the machine after each use.
Unplug the machine when not in use for an extended period.
11
MetalE-200R_404652_3L_112917.indd 11-12
On / off switch
Metal coil diameter
selector
Waste tray
Technical Data
Paper dimensions
25 sheets
Punching holes
Slot pitch
2 sheets
Adjustable edge guide
1 sheet
Voltage: 220-240V AC 50/60Hz
Current:
3 sheets
Net weight
2 sheets
Dimensions (LxDxH) 398 x 397 x 235 mm
1 sheet
50mm
Need Help?
Let our experts help you with a solution.
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase (see the
rear cover for contact details).
COIL DIAMETER & DOCUMENT SIZES
Metal coil diameter sizes
To select the correct size metal coil for a document use the document measure card, stored in the storage tray.
SET UP
1
A4
Ensure the machine is on a
59
stable surface.
5.08mm
yes- rotary
0.25 Amps
4
18,6 kg
Plug the machine into an easily
accessible mains socket. Switch
the mains supply on.
BEFORE YOU BIND
1
Tabla Orientativa de Medición
Guia de medidas
Document Measure
Select the correct coil diameter to
suit the document.
Tabla Orientativa de Medición
2 3
Check the waste tray is Fit the supplied power lead to
empty and correctly fitted. the power socket at the rear of
the machine.
5
Switch the machine on using the
power switch located at the rear of
the machine.
2 3
Adjustable back-stop margin feature.
Test punch scrap sheets to check
Set the guide to suit the back margin size required (2,3,4 or 5mm)
edge guide setting.
Eg: 2mm suits small documents (2-50 sheets), 5mm suits the largest
documents (200-450 sheets)
Guia de medidas
Document Measure
12
11/30/17 2:59 PM