Operating Tips - VALERA Professional CONIX Instrucciones De Empleo

• Make sure the unit is perfectly dry before using it.
• Do not put the appliance on heat sensitive surfaces during use.
• After use always switch the unit off and remove the plug from the
power supply socket. Do not pull on the wire to remove the plug
from the power supply socket. Do not pull the plug out of the
power supply socket when your hands are wet.
• Always allow the unit to cool before putting it away and never
wrap the cord around the unit.
• Check that the cord has not been damaged from time to time.
• Prevent the cord from coming into contact with the metal parts
while these are still hot.
• Use the unit on dry hair.
• Do not use this unit on wigs that have synthetic hair.
• The elements used to pack the unit (plastic bags, cardboard box,
etc.) must be kept out of reach of children as they are a potential
danger to them.
• This unit must only be used for the purposes for which it is
expressly intended. Any other use is to be considered improper
and therefore dangerous. The manufacturer accepts no
responsibility for damage caused by improper or erroneous use.
• Do not use hair spray while the unit is running.
• Keep the plates clean and free of dust, hair spray, styling
gel, etc.
• To avoid dangerous overheating, it is advisable to unwind the
entire length of the cord.
• The A-weighted sound pressure level of the hair curling iron for
professional use is below 70 dB(A).
• Designation of the appliance (see technical product
specifications)
HAND-HELD HAIR CURLING IRON FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
PARTS
1 Appliance
2 0/1 switch
3 On/Off led indicator
4 Conical curling tong
Switching the appliance on and off
To switch the appliance on, simply plug it into an electrical socket and move the switch (fig. 1,
ref. 2) to I. To switch it off, move the switch (fig.1, ref. 2) to 0 and remove the plug from the socket.
Important:
never leave the appliance unattended when on.

OPERATING TIPS

This appliance is designed to create curls and ringlets of various sizes.
Let the appliance preheat for about 2 minutes before using.
5 Cold end
6 Finger protection
7 Thermal pouch
5