Manual - tecxus TC 200 USB Manual

Manual

Please read manual before use.
Battery charging and USB charging function may be used separately or at
the same time.
Battery charging:
Insert either 2 or 4 batteries into the charger.
Connect charger to an AC outlet.
When charging 2 batteries please insert the batteries into the slots on
either the front or back side.
If 2 batteries are inserted into the slots on the front side, the FRONT
LED lights in red, indicating that charging is in progress.
If 2 batteries are inserted into the slots on the back side, the BACK LED
lights in red, indicating that charging is in progress.
When charging 4 batteries at the same time, both LED's will light in red,
indicating that charging is in progress.
Please refer to the charging table for recommended charging time. The
indicated charging time is for reference only. Charging time varies with
batteries of different brands or capacities.
Disconnect the charger from the AC outlet, when the recommended
charging time has been reached.
For USB output:
Connect the device to be charged to the USB outlet with a suitable USB cable.
Connect the charger to an AC outlet.
When charging has finished, disconnect the charger from the AC outlet
and USB cable.
Warning:
For indoor use only!
Use with rechargeable batteries only!
Technical information:
The TC200USB is a battery charger combining USB charging functions,
providing 2 or 4 channels for AA/AAA NiMH/NiCD batteries. It incorporates
a USB outlet to charge electronic devices at the same time.
The charger incorporates an environmental-friendly technology, combined
with high energy efficiency, conserving energy.
Technical data
Input Voltage:
Output:
Charging current:
USB output:
8
100-240V AC, 60/50Hz
0,72VA (max.)
2 X (2.8V – 150 mA) AA/AAA
5V / 1000 mA (USB charging only)
5V / 852 mA (USB & 2 pcs. batteries charging)
5V / 700 mA (USB & 4 pcs. batteries charging)
TC 200 USB