ThermoFisher Scientific Elite ORP Instrucciones De Operación página 7

Speci cation
General Speci cation
Display
Backlight
Auto off
Reset
Hold Function
Power requirement
Battey life
Water proofing
Regulatory Certifications
Environmental Operating Conditions
Ambient Operating Temperature
Relative Humidity
Storage Temperature
Storage Humidity
Accessories
Ordering Code
ORP Tester
ELITEORP
Storage and Cleaning Solutions
ECRE005
ECDPCBT
Other Accessories
ELITECAP
TSLANYARD
Self Diagnostic Messages
stable error
over range
under range
Elite ORP Tester Operating Instructions
Elite ORP
Graphics, Dot Matrix 80X100 Pixel
Yes, Selectable ( 30sec from the last key press)
8.5 minutes ( From Last Key press)
User / Factory
Yes
Four AAA 1.5 V batteries
>250 hours
IP67
CE, FCC
5°C to 45°C
5% to 85% Non-Condensing
-20°C to 60°C
5% to 85%, Non-Condensing
Product Description
Elite ORP tester with batteries
Storage solution for ORP sensor, 480 mL
Protein remover solution, 480 mL
Replacement sensor cap
Tester lanyard
Batteries are weak and need replacement soon.
Appears when calibration is attempted but the reading is not yet
stable. Wait for the reading to stabilize or manually confirm the
calibration by pressing enter.
The reading is above the measuring range of tester.
The reading is below the measuring range of tester.
7