King gates RING 180 PLUS Manual De Instrucciones página 18

Declaration in accordance with the following Directives: 2004/108/EC (EMC); 2006/42/EC (MD) Annex II, Part B
Declaration number:
Manufacturer's name: KING GATES S.R.L.
Address:
Type:
Model:
Accessories:
The undersigned, Giorgio Zanutto, as Chief Executive Officer, declares under his sole responsibility that the above product conforms
with the provisions of the following directives:
DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation
of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with
following harmonised standards: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed ma-
chinery:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending Direc-
tive 95/16/EC (consolidated text)
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and that the
following essential requirements have been fulfilled: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to transmit to the national authorities any pertinent information on the partly completed machinery, in response to a moti-
vated request, without prejudice to its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language used in this declaration, the
importer must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions
of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011,
EN 60335-2-103:2003 + A11:2009
The parts of the product that are subject to the following standards comply with them:
EN 13241-1:2003 + A1:2011; EN 12445:2002; EN 12453:2002; EN 12978:2003 + A1:2009
Sacile, 19 June 2015
8
Dichiarazione CE di conformità
e dichiarazione di incorporazione di "quasi macchina"
223/RING Rev.: 1
Via Malignani, 42 - 33077 - Sacile (PN) Italy
Motoriduttore elettromeccanico per serrande bilanciate
RING 180 PLUS
Language: EN
Giorgio Zanutto Giorgio Zanutto
(Chief Executive Officer) (Chief Executive Officer)