Idiomas disponibles
Idiomas disponibles
Tabla de contenido
Stainless Steel 80QT Cooler Cart
Owner's Manual
Item No.: 9442
Model No.: L-BC009PSS-8B
WARNING:
1. Keep all children and pets away from assembly area. Children and pets should be
supervised when they are in the area of the Cooler construction.
2. Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
3. Some parts may contain sharp edges. When assembling and using this product, basic
safety precautions should always be followed to reduce the risk of personal injury and damage
to the product. Please read all instructions before assembly and use.
4. Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep
them secure!
5. For outdoor use only.
Tabla de contenido
Resumen de contenidos para STAINLESS STEEL L-BC009PSS-8B
- Página 1 Stainless Steel 80QT Cooler Cart Owner’s Manual Item No.: 9442 Model No.: L-BC009PSS-8B WARNING: 1. Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the Cooler construction.
-
Página 2: Parts List
Parts List Part# Description Qty. Knob Body Handle Bottle opener Cap Catcher Bottom panel Wheel ( with brake and without brake ) - Página 3 M6*12 Bolt(stainless) Pre-assembled M5*12 Bolt Pre-assembled M5*35 Bolt Pre-assembled M5 Washer Pre-assembled Wrench Assembly steps: Step 1： Put the Body (C) upside down. Screw Leg (H) to Body bottom holes (as picture). Step 2： Step 3： Turn the complete body(C)180 degrees and put it Put the bottom panel(H) upside down，...
-
Página 4: Care & Maintenance
Step 4 Step 5: Connect bottle opener(E) with body(C) with Connect the knob(A) with lid(B) with bolt(CC) bolt(BB). Stuck the cap catcher(F) into the and washer(DD) and tight the bolts. Then put relevant position. the lid on the body(C). Care & Maintenance: Before using, clean the Cooler completely with a soft dry towel. - Página 5 Carrito Nevera de Acero Inoxidable de 76L Manual del Propietario Articulo No.: 9442 L-BC009PSS-8B Modelo No.: WARNING: 1.Mantenga a niños y animales fuera de la zona de montaje. Se debe vigilar a Los niños y animales cuando están cerca de la zona de construcción de la Nevera.
-
Página 6: Lista De Piezas
Lista de Piezas descripción Cantidad parte Perilla Tapa Cuerpo Manejar Abrebotellas Cap Catcher Pierna Panel inferior Rueda (Con Freno y Sin Freno) - Página 7 M6 * 12 Tornillos (de Acero) ya montada M5 * 12 Perno ya montada M5 * 35 Perno ya montada M5 Arandela ya montada Llave Inglesa los pasos de la Asamblea: Paso 1： Poner el cuerpo (C) al revés. Tornillo de la pierna (H) a los agujeros de la parte inferior del cuerpo (como imagen).
-
Página 8: Cuidado Y Mantenimiento
Paso Paso Conecte el abridor de botellas (E) con el cuerpo Conecte el mando (A) con la tapa (B) con el (C) con el perno (BB). Atascado el receptor de perno (CC) y la arandela (DD) y apretar los cabeza (F) en la posición correspondiente. pernos de las.