EXALTA EL-200 Manual De Instrucciones página 10

GB
HAIR STRAIGHTENERS
Before using this product, please read carefully this instruction manual.
It is advisable to save these instructions for a future use.
Before connecting the appliance, check the voltage shown on the
appliance corresponds to the local mains voltage.
Always unplug the appliance:
-When it is not in use
- Before cleaning it
- In case of troubles
Unplug the appliance, only after having switched it off. Never try to unplug
the product pulling it from the cable or from the product itself.
Product plates reach high temperature, for this reason it is advisable not
to place the product in direct contact of heat-sensitive surfaces (such as
wood or paper) or nearby inflammable substances. Moreover, prevent
hot plates to come in contact with hands, eyes, ears, face and neck. Never
touch plates when the unit is switched on.
Never wind the cord around the unit body.
In order to protect children from risks of electrical shocks. Never leave the
appliance unattended when it is plugged in. Always store it out of their
reach. In order to avoid possible fires and damages to the product, never
use and place the product under blankets, towels or cushions.
Keep the device and the cable away from heat, direct sunlight ,moisture ,
sharp objects and similar ones.
Never leave the product unattended if switched on! Switch it off and
unplug it when you do not use it, even if it is only for a while!
The product must not be absolutely dipped in water or other liquids or
coming in contact with them! Never use the appliance with wet or moist
hands. In case the appliance becomes moist or wet, please unplug it
immediately from the socket DO NOT TRY TO REACHTHE PRODUCT INTO
WATER!
Use the device only for its intended purpose.
In case of damages to the cable or to the product, it is necessary to stop
immediately using the product and address to specialised centres.
Never try to repair the product by yourself.
Damaged cables must be immediately replaced. Every replacement and
repairing must be carried out by specialised technicians.
For any replacement: use always original spare parts or parts of the
10