Lanaform Pure Manual De Instrucciones página 6

Instructions for use (see illustrations at the beginning of the instructions for use)
1) Place the "PURE" essential oils humidifier and diffuser in the room half an hour before lighting it so that it can adjust to room
temperature.
EN
2) Make sure it is always placed on a hard, flat and horizontal surface (a). Always keep it away from walls and heat sources such
as stoves, radiators, etc.
3) Make sure the device is clean before starting to use it.
4) Remove the reservoir and keep it upside down. Turn the reservoir lid in an anti-clockwise direction to open it. Then pour
distilled or demineralised water into the reservoir. Replace the lid and turn in a clockwise direction to close it tightly (b).
Finally, put the reservoir on the base of the device, making sure it is correctly positioned (c).
5) Make sure your hands are completely dry when connecting and disconnecting the device and if they are not, then dry them.
6) Connect the power supply plug to the device and to the electric socket (d).
7) Select the mode you want, either "humidifier" or "essential oils diffuser".
"Humidifier" mode
Just choose one of the two nozzles and fix it onto the reservoir (e) (f).
"Essential oils diffuser" mode
You must pour a few drops (3 to 4 drops at most) of essential oils into the reservoir filled with water to ensure the
device is working properly and diffusing a pleasant scent.
8) Press the on/off button, the light will come on and the device will start to work.
You can either use the device in continuous mode or programme it with the timer.
In continuous mode:
Press the on/off button to adjust the cold-mist level, the light will change colour and a beeping sound will be heard.
See chart below for further options:
Press the on/off button
Press once
Press twice
Press 3 times
Press 4 times
In timer mode:
- Start by selecting a colour that corresponds to the level of vapour emission required.
- Press the on/off button for 3 seconds, the light will flash with the colour selected. The length of time it flashes will
automatically be linked to the colour you have selected.
- If you wish to change the length of time, press the button again once and you will see that this button will flash for +/- 1
second and the background colour will change for the period in which it is flashing.
6
Light
Red
Green
Blue
Th e h u m i d i f i e r / d i f f u s e r s t o p s
Cold mist level
Low
Medium
High