GiBiDi DCS Serie Instrucciones De Instalación página 5

DCS
FUNCTIONING
Use: Turning the key activates the contact of the microswitch which transmits the code to the relative
channel.
Replacing the battery: When light emmission from the transmission LED becomes weak, the power
supply battery must be replaced. Open the casing, undo the board retaining screws, remove the old
batteries and fit the new ones (mod. CR2032; 1x3V) making sure to respect the polarities. Close the
transmitter casing being careful not to damage the circuit.
Important warnings: Because of the small size of the product, or some of its parts, it could be swallowed.
Keep away from children under the age of 3 years.
DISPOSAL: GI.BI.DI. advises recycling the plastic components and to dispose of them at
special authorised centres for electronic components thus protecting the environment
from polluting substances.
CE Declaration of conformity
The manufacturer:
Declares that the products: DCS100 - DCS200 - DCS300
Are in conformity with the following CEE Directives:
• EMC Directive 2004/108/CE and subsequent amendments
• Directive R&TTE 99/05/CE (DCS300)
and that the following harmonised standards have been applied:
• EN300 220-1, EN300 220-3, EN301 489-1, EN301 489-3, EN61000-6-2, EN61000-6-3
Date 10/01/08
GI.BI.DI. S.r.l.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) ITALY
Managing Director
Oliviero Arosio
5
UK