GiBiDi DCX100 Instrucciones De Instalación página 5

DCX
STORAGE BY MEANS OF THE CARD/TAG MASTER
If the TRANSPONDER is powered:
1. Place the CARD/TAG MASTER in front of the receiver, in correspondence of the white central led D2.
The D3 and D4 leds will turn on.
2. Move away the CARD/TAG master (the white led D3 will remain on for 6 s).
3. Place in front of the TRANSPONDER the CARD/TAG to memorize within 6 s.
4. Wait until the led turns off (storage phase exit) and the TRANSPONDER is ready for use.
STORAGE BY MEANS OF THE TRANSPONDER IN THE INSTALLATION
1. Enable the storage on the radio receiver in the installation, setting the desired channel (see radio
receiver instructions).
2. Enable the TRANSPONDER with a stored card within 6 sec.
3. Check the storage on the radio receiver (enabling of the desired output).
DELETION
2 possible deletions can be done:
1.COMPLETE DELETION OF THE MEMORY: all settings are erased, the TRANSPONDER is set with the
default values.
1. Cut off the power to the TRANSPONDER
2. Press and keep pressed the LEARN key
3. Restore the power to the TRANSPONDER
4. Wait until the white led D3 turns off (about 5 sec.) and release the key
The TRANSPONDER has gone back to the default settings.
2.CARD/TAG DELETION: only the cards and the tags already stored are erased, while the other settings
remain unchanged
If the TRANSPONDER is powered:
Press the LEARN key (the white led D3 turns on). Keep it pressed until the led turns off (about 5 sec.).
Now no CARD/TAG is stored in the TRANSPONDER memory.
The TRANSPONDER of the MANAGER line are preset also for customized use, that is instalment
code setting, user code setting, automatic substitution of a missing transmitter...
For these settings, see the MANAGER Consolle instructions.
7
UK