User Manual; Safety Warnings - Marmitek MS90 Modo De Empleo

USER MANUAL MOTION DETECTOR MS90 (Art. Nr. 09582)

SAFETY WARNINGS

• In case of improper usage or if you have opened, altered and repaired the product yourself,
all guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste.
Never use old and new batteries or different types of batteries together. Remove the batteries
when you are not using the system for a longer period of time. Check the polarity (+/-) of
the batteries when inserting them in the product. Wrong positioning can cause an explosion.
MOTION DETECTOR MS90
1. Battery compartment.
2. Control Indicator - Lights up when a
signal is transmitted.
3. TEST button.
4. Sensitivity switch 1/2 - In setting 1 the
sensor will instantly react to movement,
in setting 2 the sensor is less sensitive
and will only react after registering two
movements.
5. Tamper contact.
USING THE MOTION
DETECTOR
1. Open the battery compartment and
insert the batteries (2x AA, alkaline).
2. Keep the TEST button (3) pressed for
about 4 seconds. The LED will flash
once. Release the button. The LED will
flash twice. The motion detector has
now chosen a unique code, which can
be registered with your console.
USING THE MS90 MOTION
DETECTOR WITH YOUR SYSTEM
You need to register the MS90 motion detector
with your TotalGuard/SafeGuard/Protector system.
Your system's user guide will show you how to do
this. If you do not have a user guide at hand, you
can download one from ww.marmitek.com
(customer service -> manuals).
MS90 MOTION DETECTOR
4
3
tm
5
2
1
3