Technical Data; Safety Instructions - oneConcept 10031321 Manual De Instrucciones

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints to avoid damages. Any failure caused by ignoring the mentioned
items and cautions mentioned in the instruction manual are not covered by our warranty
and any liability.
Item number
Power supply
• Check the local voltage before working. Do not intend to touch the internal high voltage
grids while working which may cause the danger of electric shock. Never put any metal
object inside the grids while working.
• The appliance is for indoor use only. It is not suitable for use in barns, stables and similar
locations. The appliance is not intended to be used in locations where flammable vapors
or explosive dust is likely to exist. Hang or mount the appliance at the place that children
can't reach(≥2.0M).
• The appliance is not intended for use by the people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, unless they
have been strictly supervised or instructed concerning the use of the appliance by a per-
son responsible for their safety. Children should be supervised and make sure that they
would not operate the appliance alone.
• Never remove any fixed parts of the appliance to make any internal adjustment to avoid
electric shock. If the supply cord is damaged, it should be replaced by the manufacturer,
its service agent or similarly qualified person in order to avoid a hazard.
• Unplug the appliance before cleaning it. Use a suitable brush to clean the high voltage
metal grids and get rid of the bodies of insects in the collection tray every week. Be sure
it is powered off while cleaning and maintaining the appliance.
• Do not touch the high-voltage grids by fingers or metal.
• Do not wash the appliance by water or place it in the rain.
• Do not use it in the inflammable or explosive locales and alike.
• Not suitable use in garages, stables and alike.
• Repair should be carried out by the manufacturer or qualified electricians.
• Make sure that your local voltage and frequency is suitable for the appliance. Ensure the
earth-connection works properly to prevent damage or danger.
• The lamps in the appliance cannot be replaced occasionally. Ask the manufactory or its
service agent for help to change them with the approved lamps.
• Dangerous high voltage, the insect killer should be kept away and out of reach of the
children!
4

Technical Data

10031321, 10031322
220 V ~ 50-60 Hz

Safety Instructions