Troubleshooting - Rosewill SP-7260 Manual Del Usuario

7260
Gaming 2.0 Speaker System
English
Instructions
• Connect the satellite speaker
With the supplied audio cable, connect the satellite speaker to the speaker output port on the subwoofer's back panel.
• Connect the audio source
3.5mm audio connection
A.Connect the RCA plug to the RCA input on the subwoofer's back panel and the 3.5mm audio cable to your audio device or PC.
B.Connect the 3.5mm audio cable on the subwoofer's side panel and the other end of the 3.5mm audio cable to your audio device or PC.
RCA audio connection
Gaming console, DVD/VCD player connection: (PlayStation®, PlayStation® 2, Xbox
A.The console gaming Y-adapter cable
on the console or DVD/VCD player.
B.Connect one side of dual-RCA cable (sold seperately) to the RCA input on the subwoofer's back panel and the other end of the dual-RCA cable to the RCA jack on
the console or DVD/VCD player.
• Before connecting the power cable, make sure the subwoofer's power knob is in the "OFF" position. Plug the AC power cord into a standard household electrical outlet.
• Press the subwoofer's power knob to turn on the system.
• To adjust Bass, Volume and Treble
- Volume adjustment knob: Controls system volume level (Satellite and Subwoofer speakers).
- Bass adjustment knob: Controls speaker's bass level.
- Treble adjustment knob: Controls speaker's treble level.
Turn the Volume, Bass, and Treble adjustment knobs to change the level of each one.
• For private listening
The Headphone Jack on the subwoofer's side panel accepts a 3.5mm stereo mini-plug for headphones.
1
Supplied with some models
Note
• All pictures in this manual are schematic, there may be some minor variations to your actual product.
• Insert the AC power plug to a standard household electrical outlet jack. Loose connections may produce a humming sound or other noise interference.
• Do not bind the power cord with audio source cable in order to avoid interference.
• Use damp cloth to remove dirt from the surface of the product and wipe it clean with a soft dry cloth to remove moisture. Do not use solvents or alcohol to clean.
Specifications
Output power (RMS) 60 Watts (@10% THD)
Distortion ≤ 0.5% @ 1W
S/N Ratio ≥ 80 dB
Separation ≥ 45 dB
Frequency response 60Hz~20KHz
Speaker drivers Woofer: 4-inch, 4 Ohms (per channel)
Dimensions (W x H x D) Subwoofer: 7.3 x 11.3 x 9 inches (186 x 288 x 228mm)
Weight 15.43 lb (7 kg)
Connection Inputs: One pair of RCA inputs / One 3.5mm input
Control Power On/Off, Volume Knob, Bass Knob, Treble Knob
Compatibility Computer with a sound card or 3.5mm audio output jack
DVD player, game console, TV with RCA audio output jack or adapter cable
Warning
1. Do not connect the power plug into an AC outlet until all connections are made.
2. Do not connect the Subwoofer's output port to amplified speakers.
3. To avoid damage to your hearing and the speaker system, please enjoy your music at moderate volume.
4. Do not open the speaker casing – doing so will risk electric shock and void the warranty.
5. As a safety precaution, please turn off the power and unplug the power cord if you will be away for an extended period of time.
6. Please avoid exposing these speakers to excessively moist, hot, or humid environments.
7. Do not allow any liquids to come in contact with these speakers and make sure that no objects filled with liquids, such as vases, etc., are placed on or near the speakers.

Troubleshooting

Problem
★No sound coming out from the speakers
★Only one side of the speakers work when playing audio from
your PC, but both sides work normally when playing MP3
players or in games
★Speakers have no sound
★Speaker noise
1
is required (sold separately). Connect the Y-adapter cable to the 3.5mm audio plug and the RCA plug to the RCA jack
Please make sure satellite speakers are properly connected to the output port on the subwoofer, and that all audio and
power cables are properly connected.
First, check that the speaker connection and the audio cable are properly connected. Switch among CD, MP3, and
other audio to try again. If it plays normally, please check your sound source.
This phenomenon often appears in a newly assembled computer. This is because the CD-ROM's connection to the
sound card is not setup properly. One channels' signal is shorted out to the ground wire. Please rearrange the order of
the connection pins by referring to the CD-ROM and soundcard manual.
1. Make sure the power cord is plugged in properly, and if the electricity outlet is energized or not
2. Make sure the sound source is working properly
3. Make sure the cable connection is setup correctly
4. Make sure the volume knob on the control panel is adjusted to the appropriate position
The speaker system has low noise characteristics. Some DVD players and computer sound cards' noise/signal rating
is several times higher than the speaker. To determine whether the noise comes from the speakers or the sound
source, please unplug the speaker's audio cable (3.5mm or RCA). You should not hear any noise from a few feet
away.
TM or GameCube®)
Tweeter: 1.5-inch, 4 Ohms (per channel)
Satellite: 6.8 x 11.3 x 9 inches (172 x 288 x 228mm)
Outputs: 3.5mm headphone output jack
Solution
User Manual