König Electronic SEC-DVRCAM10 Manual De Uso página 3

Operation:
1. Remove the USB cover to insert the Micro SD card (4). Insert the Micro SD card
conform the diagram on the housing. The video recorder does not work without a
Micro SD card.
2. Place the SEC-DVRCAM10 first in the USB connector of a PC or notebook to fully
charge the battery. The Red indicator is lighting while charging. After 2 hours the
SEC-DVRCAM10 is ready for use.
3. Power ON the SEC-DVRCAM10 with the ON/OFF switch (2). The POWER/
FUNCTION indicator (3) flashes a few times before it lights up blue constantly. If the
indicator lights up green, it means no Micro SD card is inserted.
4. Press the RECORD/PAUSE button (1) to start recording. The POWER/FUNCTION
indicator (3) lights up green also, indicating recording is active.
5. Press the RECORD/PAUSE (1) button again to stop recording.
6. For playback of the recordings, turn on the SEC-DVRCAM10 first. Place the
SEC-DVRCAM10 with the USB connector in a free USB port of a PC or notebook.
The indicator lights up blue at this time. The PC or notebook will recognize the
SEC-DVRCAM10 as a removable disk. Open the folder to view the recordings.
Remark:
If the battery is low or empty, the POWER/FUNCTION indicator (3) will flash red. The
recording will be saved before the SEC-DVRCAM10 shuts down.
Specifications:
• Resolution:
• View resolution:
• Viewing angle:
• Data storage:
• Video format:
• File size:
• Charging time:
• Battery:
• Consumption:
• Dimensions:
• Weight:
• Operating Temperature:
640x480 (pixels)
352x288 (CIF)
58°
Micro SD card, up to 2GB
3GP
>2M Byte/minute
2 hours (via USB)
LIR-battery
155mA
97x25x12mm
32g
0°C~50°C
3