ENGLISH
Before use, make sure hair is clean, dry and tangle-free.
Plug in the unit, press and hold the on-off switch until the LCD lights up to switch the straightener
on.When the LCD temperature display reaches the desired temperature the styler is ready to use.
For extra protection and best results, section hair prior to straightening and spray with heat
protection spray. Always straighten the lower layers first.
Run the straightener through the entire length of the hair, without stopping.
Repeat only twice per section to prevent hair damage.
Take care not to hold your hand over the temperature setting switches while styling, as this could lead to
altering the temperature by mistake.
This is a high performance product, avoid frequent use to prevent damage to hair.
Due to the extreme heat capabilities of this straightener, extra care should be
taken when using.
For shorter hair, place a plastic comb between scalp and iron to avoid touching scalp.
Do not leave switched on for more than 30 minutes.
Before use, make sure hair is clean, dry and tangle-free.
While heating, during use and cooling, place on flat, smooth, heat-resistant surface.
Only hold unit at the end of the handle. Avoid touching the tips.
Do not style too close to scalp, face, ears,neck and skin.
Please note regular use of styling products may deteriorate the coating. Wipe clean regularly to
maintain performance.
Do not use an abrasive cleaning fluid to clean, as damage will occur. Use a soft damp cloth on the unit
while unplugged.
Do not scratch the surface of the plates as this will deteriorate the effectiveness of the ceramic coating.
Ensure the unit is unplugged and cool. Wipe clean any build up of styling products with a
damp cloth. Do not use an abrasive cleaning fluid to clean, as damage will occur.
2
100381_REM_IFU_S5520_21L.indd GB_2
100381_REM_IFU_S5520_21L.indd GB_2
INSTRUCTIONS FOR USE
IMPORTANT INSTRUCTIONS
CLEANING AND MAINTENANCE
21.05.10 13:40
21.05.10 13:40