Beper UT.201 Manual Del Usuario página 9

EN
5. Battery case cover
6. Battery (included)
7. LCD display
8. ON/OFF button
Functioning
Weighing
Put the webbing belt around the luggage handle and fix the
hook on the triangle ring. Press on/off before raising the
weight of the luggage (without no stress). Slowly raise the
luggage, making sure the luggage scale is horizontal and ba-
lanced. The LCD screen shows the luggage weight. Wait for
the writing is stabilized, the weight will flash three times and
the display shows "H".
The luggage scale indicates the weight for 2 minutes and then
switch off automatically.
When the weight is stabilized, press on/off to reset and start
another weighing.
To restart the appliance, press and hold the on/off button or
just wait 2 minutes for the automatic shut off.
In case of over loading, the display will show "Err". Remove
the item to avoid damages. The maximum weight capacity
is 50 kg.
Change measures
It is possible to choose the weighing between kg and lb.
When the scale id power off, press the on/off button and hold
until the LCD display shows zero. Release (the measure unit
will start flashing) and press again to change from kg to lb and
vice-versa. Once selected, wait for 3 seconds to the selection
to be settled and then start weighing.
9