Tabla de contenido
2.3 CPU Installation
For the installation of Intel 1155-Pin CPU,
please follow the steps below.
Before you insert the 1155-Pin CPU into the socket, please check if the
CPU surface is unclean or if there is any bent pin on the socket. Do not
force to insert the CPU into the socket if above situation is found. Other-
wise, the CPU will be seriously damaged.
Step 1.
Open the socket:
Step 1-1. Disengaging the lever by depressing
Step 1-2. Rotate the load lever to fully open po-
Step 1-3. Rotate the load plate to fully open po-
Step 2.
Remove PnP Cap:
Step 2-1. Attach your index finger to the upper
Step 2-2. Use your thumb to remove PnP Cap
14
down and out on the hook to clear
retention tab.
sition at approximately 135 degrees.
sition at approximately 100 degrees.
edge of the PnP Cap.
(Pick and Place Cap) from the CPU
socket by lifting the cap tab.
1. It is recommended to use the cap tab to handle and avoid kicking
off the PnP cap.
2. This cap must be placed if returning the motherboard for after
service.
ASRock H61 Pro BTC Motherboard
1155-Pin Socket Overview
B
A
Tabla de contenido
